HardTop
Gen 1 and 2 -Prowler Store HardTop
Hardtop adjustment instructions
Adjust the top with it in place and latched down front and back and with the windows up and doors closed.
Look at the light coming in under the back between the top and decklid and tighten until that goes away.
Inside nut – 3/8″ flat open end wrench (maybe 7/16″ flat closed end wrench) – tightens top to pin – Always hold still as pin turns (pinches top with middle nut)
Middle nut – 1/2″ open end wrench – tightens pin to the top – use small flat adjustable pliers to hold bottom nut
Bottom pin nut – 9/16″ open end wrench – adjusts pin height thru decklid – top up/down – use small flat adjustable pliers to hold middle nut